Convergence control Commands

Operators

• Maximum
• Variation
• Deviation
• DeviationDual
• Difference
• Imbalance
• DerivativeVariation

Variables

Variable	Location
MassFlow	Surfaces
TemperatureStagnationAbs	Surfaces
AerodynamicWorkImag	Surfaces
AerodynamicWorkReal	Surfaces
MassFlow	SurfacePairs
Pressure	Surfaces
PressureStagnationAbsRatio	SurfacePairs
Pressure	SurfacePairs
TemperatureStagnationAbsRatio	SurfacePairs
TemperatureStagnationAbs	SurfacePairs
EfficiencyIsentropic	SurfacePairs
ResidualL1	Volumes
ResidualL2	Volumes
ResidualMax	Volumes
ForceX	Surfaces
ForceTheta	Surfaces
ForceR	Surfaces
TorqueX	Surfaces
SoundPowerX	Surfaces
PenalizedBlockCount	Global
UserDefinedVariable	Analysis
MachAbs	Surfaces
VelocityAngleZ	Surfaces
BoundaryConditionControllerResidual	Global

SetVolumeConvergenceCriterion

Set convergence criteria for volumes.

Usage

SetVolumeConvergenceCriterion <control volume> <quantity> <operator> <limit>

Domain

all

SetSurfaceConvergenceCriterion

Set convergence criteria for surfaces.

Usage

SetSurfaceConvergenceCriterion <quantity> <operator> <limit [%]> <panel family name> <criterion name>
SetSurfaceConvergenceCriterion AeroWork* <operator> <limit [%]> <panel family name> <mode name>

Domain

all

SetSurfacePairConvergenceCriterion

Set convergence criteria for surface pairs.

Usage

SetSurfacePairConvergenceCriterion <quantity> <operator> <limit [%]> <panel family name in> <panel family name out> <criterion name>

Domain

all

SetGlobalConvergenceCriterion

Set global convergence criteria.

Usage

SetGlobalConvergenceCriterion <quantity> <operator> <limit> <name>

Domain

all

SetOnlineAnalysisConvergenceCriterion

Set convergence criteria for online analysis data.

Usage

SetOnlineAnalysisConvergenceCriterion [options]

Long option	Short option	Description
--source	-s	Name of online analysis that provides quantity to monitor.
--variable	-var	Variable that will be used as quantity to monitor.
--limit	-l	Value that will be compared to operator[quantitiy] (interpreted as percent for "Variation" operators in analogy to gmc).
--convergenceOperator	-cop	(optional) Operator that will be applied to quantity within the convergence interval. Choose Maximum, Variation, Deviation, DeviationDual, Difference, Imbalance, or DerivativeVariation.
--threshold	-t	(optional) Performs convergence check only if current value of quantity is above given threshold; if below the criterion is always fulfilled.

Domain

all

Example

all immediate SetOnlineAnalysisConvergenceCriterion --source Analysis004 --variable SoundPowerX --limit 0.1 --convergenceOperator Variation --threshold 0.0

Since

9.3 (threshold)

SetConvergenceCriterionStartAndInterval

Set starting time step and interval for convergence criteria.

Usage

SetConvergenceCriterionStartAndInterval <starting time step> <interval>

Domain

all